Events & Alarms: Vista Touch Flow
The following options are available within Alarm and Event Settings for Vista Touch Flow.
|
Source
- FlowRate – Set an alarm or event based on the flow rate value.
- RawCurrent – Set an alarm or event based on the Raw Current value.
- RawFrequency – Set an alarm or event based on the Raw Frequency value.
- FunctionButton 1 – Set an alarm or event based on Function Button 1.
- FunctionButton 2 – Set an alarm or event based on Function Button 2.
- CloudConnection – Set an alarm or event based on the status of the cloud connection.
- NetworkConnection – Set an alarm or event based on the status of the network connection.
Triggers
- GreaterThan – Set an alarm or event based on a value greater than Value 1.
- LessThan – Set an alarm or event based on a value less than Value 1.
- Inbetween – Set an alarm or event based on a value between Value 1 and Value 2.
- Outside– Set an alarm or event based on a value outside of Value 1.
- EqualTo – Set an alarm or event based on a value equal to Value 1.
- On– Set an alarm or event based on the status of the cloud or network connection.
- Off– Set an alarm or event based on the status of the cloud or network connection.
Units Units of Measurement (usually set for the same parameter as the gauge settings.
- Liters
- Gallons (US)
- Gallons (UK)
- Fluid Ounce (US)
- Fluid Ounce (UK)
- Cubic Feet
- Cubic Meters
Per (usually set for the same parameter as the gauge setting)
|
|
Actions
- None
- Set BackGround
- Clear BackGround
- Set Relay 1 – Change state of Relay 1
- Set Relay 2 – Change state of Relay 2
- Clear Relay 1 – Change Relay 1 back to previous
- Clear Relay 2 – Change Relay 2 back to previous
- Display Brightness – Change the brightness of the display
- Set Day Mode – Set display to positive (light)
- Set Night Mode – Set display to negative (dark)
- Reset Total 1 – Reset totalizer 1
- Reset Total 2 – Reset totalizer 2
|
