Configure Response Screen - APM Power

  1. Response Settings
Digits This setting slows down or speeds up the refresh rate of the 4-digit readout on the display.
Bar Graph This setting slows down or speeds up the refresh rate of the bar graph on the display
Alarm This setting slows down or speeds up the refresh rate of the displayed Alarm.
Analog Output This setting slows down or speeds up the refresh rate of the analog output. This feature is only active when the analog output is setup on the Analog Output screen.

  1. Digital Outputs
Digital Output 1 & Digital Output 2 These settings allow control of the on and off delay of a digital output. This is only for use if you have the outputs set to 'digital' on the Outputs screen. It can also be used within the Alarms screen.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us